D-1144 solder sleeve splices provide encapsulation, strain relief, insulation, and simple inspections for splicing together one or two wires per end. NAS 1744 splices meet 75,000 feet altitude requirements and provide and environmental resistant in-line splice. The one-piece design makes installation simple and cost effective.
This D-110 solder splice(EDMO# D-110-35)will fit silver- or tin-plated wiring with a combined diameter from 0.110 – 0.0.030 inches.
友情提醒：产品介绍及参数仅供参考，如需该件号：D-1744-02 的详细技术规格，请随时联系我们>>>，航空器材网将为您提供精准的技术支持和解决方案。
规格：
Weight:
13 mg, minimum
Temperature:
150°C (operating)
Insulation Material:
Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride
Insulation Color:
transparent blue
Thermo Indicator Color:
Violet
Meltable Rings:
Thermally stabilized thermoplastic, colored gray
Solder Preform (with Flux):
Type Sn63 per ANSI J-STD-006
Flux Type:
Type ROL1 per ANSI-J-STD-004
特征：
Simple and cost-effective installation
150°C operating temperature
Immersion Sealed
Convection or infrared installation procedure
Meets National Aerospace Standard NAS-1744
