Spring-Fast Mil-Spec composite grommet edging is designed for the high performance needs of the defense industry for use on airframes, tactical vehicles & ground based electronics. Grommet Edging is FAA Approved and installs in seconds allowing for immediate wire routing — no adhesive curing, clean up, or inspections. The NASM2259/2 series features an abrasion resistant subsurface and a polymer cushion to provided a soft surface for protecting wires and cables.
规格：
Sheet Thickness:
0.025 in – 0.036 in (0.60 mm – 0.90 mm)
Width:
0.14 in (3.56 mm)
Length:
100 ft roll (30.5 m)
Axis Conformity:
2
Vicat Softening Point per ASTM D01525 Rate B:
Thermoplastic Elastomer Cushion
Operating Temperature:
-40°F to 185°F (-40°C to 85°C)
Dielectric Strength:
1,500 volt @ 60 Hz
Substrate:
Type 304 Stainless Steel
Taber Abrasion Resistance:
TPE Cushion Per D1044 1 kg load, C17 wheel 25 mg 1,000 cycles
Finish:
Epoxy
Color:Lime green FED STD 595
Color Number: 14553
Salt Spray Hours:
2,000 hr, ASTM B117.MIL-STD-202, Method 301
Immersion:
Per NASM22529 and Skydrol Compatible
Random Shock & Vibration:
MIL-STD-1344, Method 2005.1 Test Condition VI, Letter J
Duration 8 hr longitudinal and 8 hr perpendicular. rms 41.7
Flammability:
UL94V-0 - File No. E113553 NZMT2
MIL-STD-202F, Method 111A
FAR 25.853 Telcordia GR63 Core
特征：
This NASM2259/2 Mil-Spec grommet edging(EDMO# M/2-1R-100):
Fits panels 0.025 in – 0.036 in thick
Width: 0.14 inches
Comes on a 100 foot reel
Features:
Meets military specifications
FAA Approved
Continuous heat up to 185°F (85°C)
Temperature operation as low as -40°F (-40°C)
High Corrosion Resistance
UL94 V-0 flammability rating
High shock and vibration resistance to RMS G 41.7
Superior dielectric strength
Continuous edge protection for 90° inside and outside corners
Continuous edge protection on inside and outside radius of any size
