设为首页 | 加入收藏 EngLish  
用户名:   登录密码:  
目前已经有2063家公司抢先入住,共上传了910043条航材信息
航空器材网
测试计量仪器 当前位置:首页 >> 设备展示 >> 测试计量仪器
产品名称: 大气数据测试系统
型号: AeroCal 7750i
供应商: GE
所在地: 上海
发布时间: 2010-3-2
供应商信息
公司名称:东达国际公司
地址:上海市普陀区光复西路1107号苏河汇1楼
邮编:200063
网址:
联系人:Gong
电话:86-(0)21-52358284
传真:86-(0)21-52362787
邮箱:wade@eastwonderus.com
详细介绍

The AeroCal 7750i is a laboratory ADTS for calibrating a wide variety of avionics instrumentation such as altimeters, airspeed indicators, rate of climb meters,Mach meters, air data computers and engine-based control systems that rely on accurate control and measurement of pressure. The AeroCal 7750i can be used to calibrate devices that are required to meet the Reduced Vertical Separation Minimal (RVSM) requirements, controlling altitude to within two feet(better than 0.003 in Hg) at sea level. Additionally, the AeroCal 7750i provides precision rate control for both altitude and airspeed.

技术参数
Automatic Go to Ground Upon selecting the go to ground command, the 7750i safely controls the pressure to the current, local barometric pressure. The user can then disconnect the device under test (DUT) without exposing sensitive instruments to a potential pressure transient or shock.
Leak Test Mode A separate mode is provided for performing leak checks prior to beginning an actual calibration.
Protecting the Device Under Test In order to protect the DUT, the operator can program high and low limit settings for:
  • Altitude
  • Airspeed
  • Rate of climb
  • Mach
  • Negative Qc
  • ARINC 565 envelope
Automatic Volume Characterization The 7750i automatically tunes the controller into external volumes ranging from 5 to 60 cubic inches (80 to 1000 cc). This allows a large degree of flexibility for the configuration of the test system and the type of aircraft and components to be tested. For component manufacturers, a large number of devices can be tested simultaneously on a single manifold.
Automatic Zeroing As with any instrument, regular zeroing is suggested to achieve maximum performance. This task is now automated and can be performed at the push of a button, or over the PC interfaces. The 7750i incorporates the vacuum sensor onboard; no separate or external vacuum gauges or sensors are required. In addition, only one vacuum pump is required to operate and zero the 7750i ADTS. Zeroing is performed in 30 to 45 minutes using the specificed vacuum pump.
Avionics and Pressure Units The Model 7750i displays the common avionics units including feet and meters for altitude, calibrated airspeed in knots, km/hr, and Mach with corresponding rate displays for each unit per minute. It can also display pressure units.
相关文件
相关资料点击下载
其他产品
T5-2002-104-00
T5-2002-104-00
钢索张力计
JEPPESEN
JEPPESEN
标准尺
451-101
451-101
AERO 451-101一...
452-101011
452-101011
AERO 452一氧化碳检...
适用各种飞机型号
适用各种飞机型号
动静压转接头
供应商  产品采购  维修计量  航材清单  联系我们  法律效率  广告合作  站点地图
Copyright © 航空器材网 All Rights Reserved. 沪ICP备08017026号
地址:上海普陀区曹杨路455号尚城国际苑4号楼901室
服务热线:086-21-13472838684 沪ICP备08017026号 邮箱:info@airparts.cn   版权所有:航空器材网