The PSD90-1C61 Universal AC/DC capacitance tester checks out and calibrates AC or DC fuel gauging systems, both on or off of an aircraft. This test set can simulate capacitance values for the operation of indicators and it also measures the insulation resistance of tank units and cabling. Virtually automatic operation no manual nulling is required. Includes four modes: manual Megger/DC cap ranging, low voltage/low current mode, REV DC (DC+) mode, and distance-to-fault (DTF) mode.
Version(MFR#878)is designed for universal non-F-16 fleet.
规格：
Weight:
13 lb
Dimensions:
10.6 x 14. x 6.5 in.
Input power:
100 - 230 VAC @ 45 - 440 Hz
Battery:
1 Rechargeable 12 VDC Sealed Lead Acid
Operation:
12 hours continuous at 25°C
Charge time:
8 hours max
Range:
0.000 pF to 39.99 KpF
Operating temperature:
-40°C - +55°C
Altitude:
15,000 ft (4600 m) maximum
特征：
Test Set Includes:
110V Charger, CBL PSD90-1C
230V Charger, CBL PSD90-1C
BNCF Rev. Polarity connector
BNCM Rev. Polarity connector
Ground cable
Features:
Easy to operate/calibrate
Annual calibration
Lightweight / portable
Rechargeable battery or externally powered
Percent of battery capacity displayed
Self-test on power-up
Measures DC voltage
Manual or Auto Ranging
2 and 3 Wire Megger
Compliant with Boeing Spec 10-61959 Rev H
MIL-STD-810 Method 511.4 certified
Traceable to NIST
