The MicroPulse landing light controller is a solid state, compact and lightweight lighting controller. It features dual channels and provides Wig Wag and multiple rate control for any combination of LED, incandescent, and HID landing lights. The MicroPulse has an eight position function mode switch.
This MicroPulse landing light control unit (EDMO# 9100-001-M) has ring terminals and a 10A max current rating.
规格：
Weight:
1 oz
Dimensions:
Panel label: 1.5 in, diameter
Control unit: 0.9 x 0.9 x 2.85
Voltage range:
5 VDC to 35 VDC
Max current:
10 A
Operating temperature:
-10°C to 70°C
Internal Temperature Protection:
85°C
Storage Temperature:
-40 to 100°C
Maximum Internal Temperature:
+25°C at 10A
特征：
MicroPulse Landing Light Controller with ring terminal connectors
Greatly increases the visibility of the aircraft in both daylight and nighttime operations which improves the safety of the flight
Compact, lightweight, powerful, solid state reliability to give that Wig-Wag effect
No outboard heat sinks or rheostats
Works with all major brands of lights
Gives the operator complete control over his landing light and/or taxi light
Many setting to choose from
X – both circuits are off
S – Starboard/Right on only
P – Port/Left on only
S+P – Both circuits on
A44 – Alternate at 44 PPM (STD)
B44 – Both flash at 44 PPM
A88 – Alternate at 88 PPM
A120 – Alternate at 120 PPM
RTCA/DO-160G Qualified
Comes with MicroPulse unit, installation instructions, spade terminals, placard, drill guide, and knob
