The RMALDCBS1X16 Rack Mount Amplified 1X16 GPS Splitter (GNSS Splitter) is a one input, sixteen output device. The frequency response covers the entire L-band (all GPS/GNSS frequencies) with excellent gain flatness. In the standard configuration, the splitter is powered by the receiver connected to the J1 port that powers the splitter's internal amplifier and outdoor antenna. The other outputs are DC blocked and loaded with 200Ω resistors to simulate the antenna current draw to prevent false antenna alarm faults. Ideally suited for timing and testing applications where the GPS/GNSS signal is required by as many as 16 devices simultaneously.
The NHIRMALD16 is a High Isolation 16 output splitter.
规格:
Weight:
11.6 lb
Dimensions:
17 x 8.5 x 5.25 in.
Operating temperature:
-40ºC to +75ºC
Frequency range:
1.1-1.7 GHz
Impedance:
50Ω
Gain:
14.5 dB typical
Gain high isolation:
0 dB
Current:
15 mA
Input voltage:
110 VAC
Connector:
SMA
特征:
Excellent Gain Flatness
Extremely Flat Group Delay
Amplified 14dB gain typical
High Isolation Option
DC Blocked Outputs feature 200 ohm loads
Phase Matched Outputs
Durable Rugged Standard 3U Chassis
LED Power Light