The HIALDCBS1X8 GPS High Isolated Amplified Splitter is a one input, eight output device based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS frequencies) with excellent gain flatness. In the standard configuration without external power, Output 1 (J1) passes DC from the connected GPS device through the splitter to the input (antenna port), allowing the GPS receiver to power both an active antenna and the splitter’s internal amplifier. The other RF outputs (J2-J8) are DC blocked and loaded with 200Ω resistors to simulate the antenna current draw to prevent false antenna alarm faults.
规格：
Weight:
14 oz
Dimensions:
5.25 x 2.5 x 1.3 in.
Frequency range:
1.1 to 1.7 GHz
Impedance:
50Ω
Gain:
4.5 typical
Input SWR:
50Ω 2.0:1
Output SWR:
50Ω 1.5:1
Noise figure:
4 dB typical
特征：
Excellent Gain Flatness (J1-J8) < 1.0dB
Extremely Flat Group Delay Less than 1ns variation
Amplifier Gain 4dB typical
Passes all GNSS frequencies (entire L-band)
DC blocked outputs feature 200? Loads
Phase matched outputs phase (J1-J8) < 1.0°
