This Mini Loaded DC Blocked Splitter 1X2(EDMO# MLDCBS1X2R2)is a passive one input, two output RF splitter that splits signals from 1.1 GHz to 1.7 GHz. This equipment is designed to passively split signals within the L-band to provide multiple devices with the signal from a single antenna. In the standard configuration, the J1 port will pass DC voltage from a connected device and pass this power to the antenna or other devices up-line from the splitter. The other port (J2) is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevents antenna alarm faults.
规格：
Frequency Range:
1.1-1.7 GHz
Characteristic Impedance:
50Ω
Max Input SWR:
2.0:1
Max Output SWR:
2.0:1
Insertion Loss:
-3 dB (min), -3.5 dB (typical), -4.5 dB (max)
Gain Flatness:
0.25 dB (typical), 1.0 dB (max)
Amplitude Balance:
0.1 dB (typical), 1.0 dB (max)
Phase Balance:
1 deg (typical), 2 deg (max)
Isolation:
L1:22 dB L2:15 dB (min), L1:28.4 dB L2:17.3 dB (typical)
Group Delay Flatness:
0.5 ns (typical), 1.0 ns (max)
特征：
Precise Amplitude Balance
Less than 1 dB variation between ports.
Flat Group Delay
Less than 1ns variation between L1 and L2.
Low Insertion Loss
-3.5 dB loss is typical across all operating frequencies.
Wide Accepted Frequency Range
Accepts signals from the entire L-Band, covering all major GNSS constellations.
Efficiently Blocked Ports
Uses 200? resistor to prevent antenna alarm faults from connected devices.
Matched Phase Balance
Less than 2° of variation between ports.
Smallest GPS Antenna Splitter in the World!
