The KS 270C Pitch Servo is used to provide AFCS control of the elevators. It contains a servo motor with amplifier and an engage clutch, as well as a torque sensor for trim command generation.
规格：
Weight:
2.5 lb
Dimensions:
3.925 x 4.675 x 4.605 in
Mounting:
Two (2) AN3 bolts
Power Inputs:
28 VDC @ 4.0 amps
Clutch Engage Signal:
28 VDC (active high input) and Ground (active low input)
Mating Connector:
030-03248-0000
Signal Inputs:
10 VDC
Signal Outputs:
Trim Voltage: ±28 VDC
Trim Sense: ±3 VDC
特征：
This KC 270(EDMO# 00178-2500)has a servo speed of 1.9 RPM.
Contains a servo motor with amplifier and an engage clutch, as well as a torque sensor for trim command generation
Outputs a dual-channel trim sense signal with a scale factor of 100mV/in-lb, with a positive differential voltage representing CW torque
Maximum sensed torque is at least 20 in-lb in each direction
Also contains a tach feedback signal to provide servo motion sensing
Outputs a differential signal with a scale factor of approximately 5.3V for full servo speed
Is installed with a KM 275 servo mount, which contains a slip clutch for pilot override
