The SPC-10 static inverter utilizes solid state circuitry to convert 28 VDC to 115/26 VAC, 400 Hz sine wave power. Design features include pulse-width modulated square to sine wave power conversion permitting lightweight and reliable operation. Capable of delivering an overload of 150% of rated current for a duration not less than five minutes under all environmental conditions.
SPC-10(F) features DC ground, AC return, Remote On/Off, Phase Lock, On/Off Return. MS3106B20-16S mate.
规格：
Weight:
5.5 lb
Dimensions:
4.45 x 8.25 x 3.45 in overall
Input voltage:
24 to 32 VDC
Input current:
10.6 A
Output power:
250 VA
Output voltage:
115 VAC and / or 26 VAC
Efficiency:
82% min.
Phase:
Single
Waveform:
Sine wave
Frequency:
400 Hz ± 1%
Amplitude distortion:
Less than 7% (3% Typ.)
Power factor:
0.8 to -0.95
Altitude:
55,000 ft
Temperature:
-65°F to +160°F (-55°C to +71°C)
Humidity:
Tested to greater than 95% for 10 days, temperature was cycled between 75°F to 160°F
Environmental:
Qualified to meet RTCA paper D0-160 Env. Cat. D2BR--
Input overvoltage:
Operate up to 37 VDC input while supplying full rated VA output power. Output voltage under this condition is 115 VAC +5%, 7%.
Input transient protection:
Withstands without damage or degradation load exceeding 150% of rated output to an output dead short.Inverter delivers rated output on removal of above conditions.
特征：
The SPC-10(F) pin designation:
(A) Remote On/Off
(B) 115 VAC output
(C) AC return
(D) On/Off return
(E) No connection
(F) Phase lock
(G) 26 VAC output
(H) 28 VDC input
(I) DC ground
Features:
Solid state circuitry
400 Hz sine wave power
Pulse-width modulated square to sine wave conversion
Lightweight and reliable operation
150% overload of rated current
TSO'd
