The RG28B power converter converts a 28 VDC input to a regulated 19 VDC output voltage. This converter is capable of delivering 280 continuous watts at 14 VDC (20A output). The 14 VDC output is buck converted from the input voltage; and therefore, the output voltage is not isolated from the input. A state of art ""synchronous current mode switching"" topology with surface mount technology facilitates the power conversion process. Control circuit with a synchronous PWM controller provides for voltage regulation and current limit. Circuit protection includes an output short circuit current limit and shuts down when the voltage feedback loop is opened.
规格：
Weight:
1.2 lb
Dimensions:
2.75 x 6.875 x 2.24 in
Input Voltage:
28 VDC — 32 VDC, nominal
Input Current:
10.8 Amps @ 28 VDC, full load
0.3 Amps @ no load, no load
Output Voltage:
14 VDC, regulated
Output Current:
0 — 20 amps, continuous
Power Output:
280 watts, continuous
420 watts, for 5 min. (min.)
Regulation:
1% for line
1% for load
1% for temperature
Overload:
delivers 110% output power for 2 hours minimum
Overload Protection:
Withstands without damage or degradation loads exceeding 110% to an output short circuit. Unit delivers rated output power upon removal of the overload condition
Short Circuit Protection:
Under a output short circuit condition, the current is limited to approximately 37.5 Amps
Efficiency:
92%, typical
Temperature:
-55°C to 71°C
Cooling:
Convection and thermal conduction through the bottom plate (No internal fan)
Altitude:
55,000 ft
Compliance:
FAA TSO C71
Environmental:
DO-160D/C by test, design similarity and/or design analysis per:
F2-BBB[STX]EWXDFSABAZZXLXXXX
Finish:
gold iridite per MIL-C-5541 class 1A
特征：
Converts 28 VDC input to regulated 19 VDC output
Delivers 280 continuous watts at 14 VDC
Convection cooled via thermal conductor plate
Power conversion uses ""synchronous mode switching"" topography with surface mount technology
Provides circuit overload protection and short circuit protection
